Ferm PSM1024, Оригинальное руководство пользователя

Страница: 5 / 88

5
EN
TECHNICAL DATA
PSM1030P
Mains voltage V~ 220 - 240
Mains frequency Hz 50
Power input W 520
No-load speed min
-1
10,000
Sanding surface mm 114 x 234
Protection class IP 20
Weight kg 1.91
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 60745; it may be used
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
DESCRIPTION (FIG. A)
Your finishing sander has been designed for
sanding wood, metal, plastics and painted
surfaces.
1. On/off switch
2. Sanding pad
3. Sanding paper clamp
4. Grip
ASSEMBLY
4
Before assembly, always switch off the
machine and remove the mains plug
from the mains.
Mounting and removing the sanding paper
(sanding paper clamps) (fig. C)
Mounting
● Open the sanding paper clamps (4).
● Mount sanding paper (7) with the required
grain size onto the sanding pad (3).
● Fold the sanding paper (7) at both ends
around the edges of the sanding pad (3).
● Close the sanding paper clamps (4) one by
one. Make sure that the ends of the sanding
paper (7) are clamped.
Removing
● Open the sanding paper clamps (4).
● Remove the sanding paper (7) from the
sanding pad (3).
USE
Switching on and off (fig. A)
● To switch on the machine, press the on/off
switch (1).
● To switch off the machine, release the on/off
switch (1).
Hints for optimum use
● Clamp the workpiece.
● Firmly hold the machine by the grip.
● Switch on the machine.
● Place the sanding pad with sanding paper on
the workpiece.
● Slowly move the machine over the workpiece,
firmly pressing the sanding pad against the
workpiece.
● Do not apply too much pressure on the
machine. Let the machine do the work.
● Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularly clean the housing with a soft cloth.
● Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
● Regularly clean the sanding pad to avoid
inaccuracies during use.