Ferm
13
The machines have been designed to operate over along period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
Lubrication
The machine requiers no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the
warranty card. In the back of this manual you find an exploded view showing the parts that can
be ordered.
Environment
To prevent damage during transport, the appliance is
delivered in a solid packaging which consists largely of reusable material. Therefore please
make use of options for recycling the packaging.
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Warranty
The guarantee conditions can be found on the separately enclosed guarantee card.
GB
D
NL
F
E
P
I
S
SF
N
DK
Ferm
FLADDYVELFRÆSER
Tallene i den følgende tekst korresponderer med afbildningerne på side 2 - 5.
Læs denne brugsanvisning godt igennem før maskinen tages i brug. Sørg for at De
kender maskinens funktion og betjening. Vedligehold maskinen i følge
instruktionerne, for at maskinen altid kan fungere optimalt. Bevar denne
brugsanvisning og den vedlagte dokumentation til maskinen.
Indhold:
1.
Tekniske specifikationer
2.
Sikkerhedsforskrifter
3. Justering af maskine
4. Montering af tilbehør
5.
Brug af maskinen
6. Vedligeholdelse
1. TEKNISKE SPECIFIKATIONER
Tekniske data
Emballagens indhold
1 Skyggefugefræser
1
Savblade
1 Skruenøgle
1 Justeringsplade
1 Unbrakonøgle
1 Støvpose
1
Brugsanvisning
1
Sikkerhedsfolder
1
Garantikort
Spænding
|
230 V~
Frekvens
|
50 Hz
Indgangseffekt
|
710 W
Tomgangshastighed
|
11.000/min.
Skivens diameter
|
Ø 100 mm
Klingens huldiameter
|
Ø 20 / 22 mm
Maksimal fræsedybde
|
18 mm
Justering af anslag
|
0-90°
Spindelstørrelse
|
M10
Vægt
|
3.0 kg
Lpa (lydtryk)
|
89.6 dB(A)
Lwa (lydeffekt)
|
102.6 dB(A)
Vibrationsværdi
|
1.9 m/s
2
96
UK
D
NL
F
E
P
I
S
SF
N
DK