ferm living HAZE FERM-1104263107, Инструкция по сборке

Страница: 4 / 5

ASSEMBLY PROCESS
Insert the u-formed stabiliser inside the
cabinet so that it faces downwards. Place it
upon the pre-drilled holes at the bottom of
the cabinet, then use the hex key to fasten
the two screws from underneath.
4
2 x M6 16mm screws
Use 4 mm hex key
ASSEMBLY PROCESS
Add the two rubber pads on top of the
u-form to prevent friction between the parts.
Then place the metal shelf inside the cabinet
and lower it down, so that it ends up
resting upon the u-form as well as the
support in the four corners.
5
Add the two
rubber pads
5 6