7
Before Switching on your TV
Power connection
IMPORTANT:
The TV set is designed to operate on
230-240 V AC, 50 Hz.
After unpacking, allow the TV set to reach the am-
bient room temperature before you connect the
set to the mains.
Aerial Connections
Connect the aerial plug to the aerial input socket
located at the back of the TV.
How to connect other devices
IMPORTANT:
Switch off the TV before connecting
any external device.
Sockets for external connections are on the back of
the TV.
For connection of other devices via Euroconnector
(RCA JACK) refer to the manuals of the related de-
vices.
Inserting batteries in the remote
control handset
Remove the battery cover located on the back of
the handset by gently pulling upwards from the in-
dicated part.
Insert two
AAA (R03)
or equivalent type batteries
inside.
Replace the battery cover.
NOTE:
Remove batteries from remote control
handset when it is not to be used for a long
period.Otherwise it can be damaged due to any
leakage of batteries.
Switching the TV ON/OFF
You can operate your TV either using the re-
mote control handset or directly using the
TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1-
Press the power button located on the front of the
TV. Then the TV switches itself to standby mode
and the LED located below becomes
RED
.
2-
To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected,
or,
Press Programme Up or Down buttons on the front
of the TV or on the remote control.
By either ways the TV will switch on and the LED will
turn off.
To switch the TV off
Press the stand-by button on the remote control,
so the TV will switch to stand-by mode and the
LED will become Red,
or,
Press the power button located on the front of the
TV, so the TV will switch off.
50058935-2825W-2147 UK-IDTV TV-DVB AK45 IB-FERGUSON-FTV28DFW5-10031081.p65
22.11.2004, 17:59
7
Содержание FTV28DFW5
Страница 60: ......
