Ferguson FTV28DFW5, Инструкция

Страница: 42 / 60

41
You can operate your TV both using the re-
mote control handset and onset buttons.
Operating with the onset buttons
Volume setting and programme selection can be
made using the buttons on the front of the TV.
Volume Setting
• Press “ - ” button to decrease volume or
“ + ” button to increase volume.
Programme Selecting
• Press “ P/CH+ ” button to select the next pro-
gramme or “ -P/CH ” button to select the previous
programme.
Entering Main Menu
• Press “ MENU ” button to enter the MENU . In the
MENU select the sub-menus using “ -P/Ch ” or
“ P/Ch+ ” buttons and enter the sub-menus using
“ - ” or “ + ” buttons.
Operating with Remote Control
Volume Setting
Press “ V+ ” button to increase volume. Press “ V- ”
button to decrease volume.
Programme Selecting
(Previous or next programme)
• Press “ P - ” button to select the previous pro-
gramme.
• Press “ P+ ” button to select the next programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to
select programmes between 0 and 9. TV will switch
to the selected programme. To select programmes
between 10 - 99, you must use the double digit but-
ton " - - ".
this OSD is displayed at the left hand upper
on the screen.
After then, press the digit buttons consecutively for
the programme you want to select (eg. for pro-
gramme 27, first press 2 and then 7).
Programme Swapping
• Press " P<P " (programme swap) button to select
the last selected programme. This button provides
swapping between last two selected programmes.
For example, select programme 8, then select pro-
gramme 2. Now, if you press " P<P " button, pro-
gramme 8 will be selected. If you press the same
button again, programme 2 will be selected and so
on.
Operating the TV
ANALOGUE TV
50058935-2825W-2147 UK-IDTV TV-DVB AK45 IB-FERGUSON-FTV28DFW5-10031081.p65 22.11.2004, 18:00 41