Ferax 26236-0100, Руководство пользователя

Страница: 26 / 48

22
and other objects that may be harmful to your
router bit.
• Do not jam or try and over push the work
piece into the machine during operation. This
may cause damage to the machine. Feed the
work piece with a firm grasp, slowly and
easily and hold the work-piece against the
fence.
• Make sure the spindle rotates in the correct
direction.
• Do not let anyone stand in front of the mach -
ine while operation.
• Technical difficulties. Any problems you
may run into should be carefully looked at
with the power OFF and the machine unplug -
ged from the power source.
• Never draw the work-piece back during the
cutting operation. Stop the router bit before
drawing back the work-piece.
• Always keep bits sharpened and clean.
Important:
The safety instructions
given above can not be complete
because the environment in every
shop is different. Always consider
safety first as it applies to your indi-
vidual working conditions.
3. FEATURES
Table top
Size ....................................cm 81 - Long
...........................................cm 61 - Wide
........................................... cm 3.5 - Thick
Aluminum miter track .......cm 81 - Long
Aluminum T - track ...........cm 30 - Long
Table insert ........................cm 23 × 30.5
Fence
Size .................................... cm 45.7 - Long
...........................................cm 15 - Wide
........................................... cm 2.5 - Thick
L - Aluminum .....................cm 10 ×10 ×84-Long
Dust Port ........................... cm 6.5 to 7.62
Gaurd ...................................... Fluorescent
plastic plate
Aluminum miter track ....... cm 45.7 - Long
Ruler label ......................... cm 45.7 - Long
Stand
Made of .................................. Cast iron
Height ................................cm 86.4
Includes: 4 non - marring rubber feet
4. PHYSICAL FEATURES
1
10
2 3
4
5
6
7
8
9
1. Aluminum miter-track
2. Ruler label
3. Dust port
4. Guard
5. Aluminum T-track
6. Guide pin
7. Rubber feet
8. Aluminum miter-track
9. Table insert
10. Table top