Fenton 102.120, Инструкция по эксплуатации

Страница: 5 / 20

5
PLAYING FROM USB DRIVE
•
Press the function button [5] to enter the USB mode; it will play automatically when the USB drive is plugged in.
•
To pause playback, press the PLAY/PAUSE button [8]. To continue playback, press the PLAY/PAUSE button [8] again.
•
To stop playback, press the STOP button [9].
•
To skip tracks, press the NEXT button [7]. Press the PREV button [6] once to go back to the beginning of current song. Press
the PREV button [6] twice to start the previous song.
PLAYING A VINYL RECORD
•
Before playing a record, please unlatch the Tone Arm Lock [28] and remove the cartridge protector from the cartridge/needle.
•
Press the function button [5] to enter the PHONO mode. Place the record on the turntable [24], select the speed required
using the speed selector [25] and gently place the needle on the record. The turntable will start spinning when the AUTO
STOP switch is set to the ON position.
•
Besides the speed selector, there is an AUTO STOP ON/OFF Switch [27]. If the AUTO STOP ON/OFF Switch is turned ON,
the record will stop automatically when finished (some vinyl records will not stop automatically when it reaches the end or will
stop earlier). When the switch is set to OFF, the record will NOT stop automatically when finished.
•
Press the REC button [10], the REC indicator [12] will light up and USB will flash on the display. The vinyl records will now be
recorded onto the USB drive. Press the STOP button [9] to stop recording and save the recorded file.
LISTEN TO AN EXTERNAL SOURCE
•
To listen to an external source, such as an MP3 player or smartphone, connect a suitable cable (3.5mm jack to 3.5mm jack) to
the AUX IN socket [17] at the back of this unit. Press the function button [5] to enter AUX in mode.
•
Press the REC button [10], the REC indicator [12] will light up and USB will flash on the display. The external sources
’ output
will now be recorded onto the inserted USB drive. Press the STOP button [9] to stop recording and save the recorded file.
PLAYING VIA BT
•
Press the function button [5] to enter the BT mode.
•
The BT indicator [11] will flash in a blue color.
•
Turn on the BT function on your smartphone or tablet PC and search for
“Fenton recordplayer”. After successful pairing, the
BT indicator [11] will stop flashing. You can now play your music via streaming.
Noted
: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT
speaker
When the unit is used as a BT speaker, all other playback functions cannot be used at the same time.
HOW TO REPLACE THE NEEDLE
To replace the needle, please refer to the instructions below.
Removing the needle from the cartridge
•
Place a screwdriver at the tip of the stylus and push downward as shown
in direction “A”.
•
Remove the stylus by pulling the stylus forward and pushing downward.
Installing the stylus
•
Hold the tip of the stylus and insert the stylus by pressing as shown in
directi
on “B”.
•
Push the stylus upward as in direction "C" until the stylus locks into the tip position.