2
0800 002 725
|
fentec.co.nz
Thank you for choosing
Fentec EasyWall range. This
product will provide you
with many years of trouble
free protection if installed
in accordance with the
directions outlined in this
document.
This guide does not apply to
any fences over 1.8m in height.
If your fence is greater that
1.8m, please seek further advice
from Fentec.
Describe your site details when
ordering materials.
Identify your soil type/ground
conditions. Refer to the table in
Tape Measure
Spade
Shovel
Level
String Line
Concrete
Auger - 300mm
diamenter
Hacksaw or
powered metal
cutting saw
Laser-level
Safety Boots
Gloves
Helmet
Eye Protection
Hearing Protection
Sun Protection
-
Make sure you choose the
right tools before start installing
your fence.
TOOLS LIST
It is recommended that the reader
pays particular attention to those items
identified as IMPORTANT in this manual to
ensure satisfactory long-term performance.
Step 1. This will determine the
concrete and footing details
required.
Make sure you are aware of
underground services before
you start digging! These could
be gas, electricity, or water
mains. Call your local council
for more information.
Check your local council
regulations on boundary
fencing.
Check the delivered material
for the correct number of
components and general
condition before beginning
your installation.
The recommendations detailed
in this guide are formulated
along the lines of good building
practice. They are not intended
to be an exhaustive statement
of all the relevant data.
If you have any questions,
please contact our Technical
Team on 0800 002 725. We are
always happy to help in any way
we can.
TOOLS
OPTIONAL
SAFETY GEAR
minimum required
INTRODUCTION
BEFORE YOU START, READ THIS
IMPOR
TANT
