FENNEK HEXAGON, Руководство пользователя

Страница: 8 / 12

6
• In the case of burns: Immediately cool off
burnt areas. It is recommended to see a
doctor. In the case of higher-degree burns,
call emergency services (emergency
number varies from country to country).
• Never light a fire in the woods. FENNEK
products should only be used outdoors
and in designated barbecue areas.
• Please keep in mind that there is always
the risk of flying sparks that might cause
bodily injury or damages to property.
• It is highly recommended to avoid use of a
barbecue or fire for cooking in extremely
dry weather conditions. Always comply
with the applicable fire safety regulations.
• Never cool off parts with water or similar
fluids. The
extreme difference in
temperature may cause deforming of and
permanent damage to the plates. Always
let parts cool down in the open air. Always
transport FENNEK products in suitable
cases.
Other Information
• FENNEK HEXAGON is intended for outdoor
use only. Never operate it in enclosed
rooms.
• FENNEK HEXAGON may only be used for
personal
purposes; any use for
commercial purposes is prohibited.
• Never operate FENNEK HEXAGON under
the influence of e.g. fatigue, alcohol,
drugs, or medication.
• Keep children and animals away from the
fire.
• When in use, a distance of at least 3
meters should be maintained between the
FENNEK product and any flammable
objects. Always keep emergency exits,
doors, or similar exit routes clear from
obstructions.
5. Maintenance and Care
• It is recommended to regularly clean
your FENNEK product in order to avoid
any grease deposits and sooting.
Cleaning is recommended after each
use.
• Always allow the combustible, such as
em-bers, coal and wood, to burn down
completely. This reduces the time
required for cleaning, as it burns off
excess grease and cooking residues.
• Remove cold ashes. It is important to re-
move cold ashes before moisture gets to
it. Ashes contain salt and may cause
corrosion on the inner sides of the
combustion chamber. Over the years,
this may result in damages to your
product due to rust.
• Do not clean any parts until all parts have
cooled off.
• We recommend sweeping bigger
residues off with a hand brush. Roughly
clean all parts by wiping them with paper
or a cloth. The parts should then be
cleaned off properly with water (without
cleaning agents) or can be put into the
dishwasher.
• Please ensure that there are no residues
of any cleaning agents on any of the
parts prior to the next use.
• FENNEK products should always be
stored in a dry place, protected from
moisture.
Caution: Parts can have sharp edges.
Do not use steel wool or similar products for
cleaning. Steel wool residues may remain in
the pores of stainless steel parts and can
cause rusting.
6. Safety Information
CAUTION:
• FENNEK products should never be oper-
ated by children or people with restricted
psychological and/or physical abilities.
People with restricted abilities, children
and animals must maintain an adequate
safety distance from any FENNEK product
while in use.
EN