FENNEK HEXAGON, Руководство пользователя

Страница: 7 / 12

5
www.fennek-grill.de
EN
1. General
Thank you for purchasing a FENNEK product.
Prior to the first use of your new FENNEK
product, please check to ensure all parts are
accounted for. Once the product has been
used, we cannot be held responsible for
missing items.
2. Parts Included
3x side walls 1, 3x side walls 2, 1 base plate,
1 assembly instructions.
Important: Carefully read the
following instructions prior to use
and keep them for future
reference.
3. Assembly and Start-up
All parts need to be cleaned prior to first use
in order to remove any machining residues
that might be present.
HEXAGON may only be used as a fire bowl.
Improper use may lead to bodily injury or
damage to property.
Please see enclosed assembly instructions
for further information on
how to assemble .
It is very important to observe the sequence
of the parts. A little bit of force is required
when putting together the last parts as well
as when removing the base plate and the
first side part during the disassembly. This is
necessary for design and stability reasons.
Once assembled, place FENNEK HEXAGON
on an even, clean, and heat-resistant
surface. Put about 3 to 4 firelighters into the
combustion chamber. We recommend using
firelighter wool, paraffin-based cubes,
organic firelighters etc. Put the coal grate
back on and use a FENNEK Jet lighter, a BBQ
lighter or long matches to light the
firelighters.
Place some kindling above the firelighters.
Once the flames have moved from the
firelighters to the kindling wood, put more
wood into the fire bowl. We recommend
using chamber dried beech wood logs with a
length of about 25 cm and a maximum
residual moisture of 20 %. No more than 8
logs should be put into the HEXAGON at the
same time.
4. Warnings
Risk of Burns
• Place HEXAGON on a horizontal surface
that is even, safe, heat-resistant and clean.
• Only use adequate flammable material
made of wood fiber or wood wool / wax or
use kerosene-based fire starters. Exclusive
firelighters according to DIN EN 1860-3 are
permitted. Do not use fuel paste, as it may
leak and cause burns. Do not use other
highly volatile fluids such as spirits or
gasoline.
• While in use, the fire bowl and the com-
bustible material inside of it will become
extremely hot.
• Do not move the product while in use or if
not entirely cooled off.
• Do not touch your FENNEK product until all
parts have cooled off.
• Do not clean any parts unless all parts have
cooled off.
• Do not stow away your FENNEK product
un-til all parts have cooled off.
• Do not remove ashes unless all firewood
has completely burned off, and all parts
have cooled off.
How to Handle Fire