8. Maximizing Battery Life
8. Maximizing Battery Life
8. Maximizing Battery Life
8. Maximizing Battery Life
The battery of a smartwatch is much smaller than
a mobile phone. We have taken tremendous
efforts to optimize battery life so that the Fennec
Watch can last for a day’s use. With a SIM card
inserted, the standby time of the watch can be as
long as 30 hours or more.*
However, if you frequently use applications on the
watch, the battery may drain faster.
High power consumption applications
High power consumption applications
High power consumption applications
High power consumption applications
Below are examples of high power consumption
applications for your reference:
•
Video calling:
Video calling:
Video calling:
Video calling: 2% battery use per minute if
using mobile data.
•
Playing music over Bluetooth
Playing music over Bluetooth
Playing music over Bluetooth
Playing music over Bluetooth: 0.5%~1% battery
use per minute with a SIM card installed.
•
Games/Camera
Games/Camera
Games/Camera
Games/Camera: 0.5%~1% battery use per
minute with a SIM card installed.
* Disclaimer: Standby time may vary depending on mobile/Wi-Fi signal strength and the watch settings.
The battery may drain faster when
The battery may drain faster when
The battery may drain faster when
The battery may drain faster when
there is poor cellular signal
there is poor cellular signal
there is poor cellular signal
there is poor cellular signal
•
No cellular signal:
No cellular signal:
No cellular signal:
No cellular signal: The watch will continuously
search for a cellular signal, consuming power.
•
Poor cellular signal:
Poor cellular signal:
Poor cellular signal:
Poor cellular signal: The watch will
continuously connect and reconnect to the
network, consuming power.
The Fennec Watch has a built-in battery saver.
When it detects that the watch is in an area with
poor or no cell coverage, it shuts down the
mobile data connection or even the cell radio
on the watch. The watch will then try to
reconnect back to the cellular network every
3~10 minutes. This greatly improves the standby
time of the watch, but it also means that the
watch will lose contact temporarily when there
is poor cellular signal.
