Fenix Reference G12
6
Rev. 0.2.1
There is an optional
shock locator which
allow to use the
damper with a more
gentle angle and with
several different shock
locations.
To use this insert the
HW033 M3x10
countesink hole, insert
the G12-8 shock
holder and fix it with
the M3 nylock.
Insert the M3x10
Hw004 in the 15mm
post and fix it.
When you use the
Sanwa option, the
fully option group, will
look like this one
Note: for you comfort, pre-thread both plastic ball cup before assembly the
turnbuckles
Using the CRC from
bag A made 2
turnbuckles as show
Note: use CRC plastic
ball cup on the
steering block
together the CRC red
low profile ball.
Fenix plastic ball cup
and FX-FU48 are to be
used on servo saver
