Fenix Reference G12, Руководство пользователя

Страница: 13 / 19

Fenix Reference G12
13
Rev. 0.2.1
From Bag C, insert 2
x male stud.
Fix the short link
between V-link F1
and V-link F2
Note
Please, check in the
tech section about
the V-link settings.
Install the side link
you’ve
prepared
before using 1
HW029 M3x12
button screw.
Insert the G56042
spacer between the
carbon side wing
and the link.
Use 2 x 2mm allen
to tight the sphere
link.
Check our channel on Youtube for some explicative video.
https://www.youtube.com/channel/UCDZqN09hr2EaI7qHCMjUcjQ
Now, lay the car on
a flat setup board
and make the final
fine tuning of the
links length. Chassis
and motor pod must
lay flat on the setup
board.
Take the proper
time for this setting.
Now you can couple
the motor pod to
the chassis group.
.
Side links can be
installed using 2 x
HW012 M3x6.