Fenix Imvico EPC1200 Series, Руководство по эксплуатации

Страница: 35 / 58

EPC1200 SERIES OPERATION MANUAL
35/58
GS ! n
[Name] Select character size
[Format] ASCII GS !
n
Hex 1D 21
n
Decimal 29 33
n
[Range] 0
≤
n
≤
255 (1
≤
vertical number of times
≤
8, 1
≤
horizontal number of times
≤
8)
[Description] Selects the character height using bits 0 to 3 and selects the character width using bits
4 to 7, as follows:
Bit OFF / ON Hex Function
0
Character height selection. See Table 2.
1
2
3
4
Character width selection. See Table 1.
5
6
7
Table 1 Table 2
Character Width Selection Character Height Selection
Hex Width Hex Height
00 1 (normal) 00 1 (normal)
10 2 (double-width) 01 2 (double-height)
20 3 02 3
30 4 03 4
40 5 04 5
50 6 05 6
60 7 06 7
70 8 07 8
[Notes] This command is effective for all characters, except for HRI characters.
The vertical direction is the paper feed direction, and the horizontal direction is
perpendicular to the paper feed direction.
When characters are enlarged with different sizes on one line, all the characters on
the line are aligned at the baseline.
The
ESC !
command can also turn double-width and double-height modes on or
off. However, the setting of the last received command is effective.
[Default]
n
= 0
[Reference]
ESC !, APPENDIX A - SPECIFICATIONS
GS ( A pL pH n m
[Name] Execute test print
[Format] ASCII GS ( A
pL pH n m
Hex 1D 28 41
pL pH n m
Decimal 29 40 65
pL pH n m
[Range] (
pL
+ (
pH
x 256)) = 2 (where
pL
= 2,
pH
= 0)
48
≤
n
≤
50
49
≤
m
≤
51
[Description] Executes a test print with a specified test pattern on a specified paper.
•
pL
,
ph
specifies (
pL
+(
ph
x256)) for the number of the bytes after
ph
(
n
and
m
).
•
n
specifies the paper to be tested.
•
m
specifies a test pattern.
n Paper
48
49
50 Paper roll