CONNECT MICROPHONE
A microphone can be installed by cutting the splice
connecting the Green and Gray wires (default shipping
configuration). A microphone should then be connected
by soldering and heat shrinking the microphone GND to
the Gray wire, and the microphone signal to the Green
wire.
When keyed, the microphone will take priority and
interrupt any siren tone.
MICROPHONE & EXTRAS
If the microphone is not connected, the Gray and Green wires
must be connected.
*otherwise the unit will think the microphone is constantly keyed
FENIEX
//
2019
// INSTRUCTION MANUAL // v1.4
WEB
//
www.feniexindustries.com
6
TM
