Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
5
WIRING INFORMATION & FUNCTIONS
Black
Ground
Red
Positive
12V-
Connect to vehicle's
negative battery post
12V+
Connect to vehicle's
positive battery post
1.
Install a customer supplied fuse rated for
125% of the circuit load to the end of the red
wire. Do not use a circuit breaker or fusible
link.
2.
Connect the opposite end of the fuse to
the 12v+ terminal of the battery. Do not use
more than 1 foot of wire between the fuse and
the battery terminal to ensure appropriate
protection.
POWER CABLE WIRING
3.
Connect the black wire to the vehicle
chassis ground.
4.
Connect the function wires to
switches, depending on the functions
needed for applications (See page 6 for
wiring diagrams).
WARNING MODES
Activate the warning modes by extending the Brown wire to a 12v+ latching switch to
activate mode 1. To activate mode 2, extend the Green wire to a 12v+ latching switch.
Mode 2 will override Mode 1.
Brown
Green
Mode 1
Mode 2
12V+
12V+
Mode 1 activation
(all positions)
Mode 2 activation (all
positions,
overrides mode 1
)
Yellow
Work Light/Pattern
12V+
Programmable,
work light
activation or
pattern changer
CHANGING FLASH PATTERNS
To change flash patterns, tap the yellow wire to a 12v+. Flash patterns are listed on page 4.
Takedown & alley functionality must be specified at time of order. Modules in takedown
and/or alley positions will only function as such, or flashing takedown/alley.
No warning
patterns will be displayed in takedown or alley positions.
ATTENTION:
