FENDT varioguide Скачать руководство пользователя страница 22

Страница: 22 / 158

• The GNSS signal can be obstructed by dense

trees, copses, buildings, high-voltage power

lines etc.

Fig. 3

• VarioGuide may lose the connection to certain

satellites, including the correction signal

satellite, if the vehicle is operated on slopes,

causing the satellite to be out of the aerial's

reception range.

Fig. 4

• VarioGuide steers the tractor, NOT the

implement.

• If the implement does not run concentrically to

the tractor because it is being pulled downhill,

for example, deviations in accuracy may occur.

Fig. 5

• The wave angle and thus reception of the

correction signal decreases as the vehicle

moves further north.

• Hilly terrain causes reception of satellite signals

to deteriorate.

• The GNSS system does not offer uniform

availability around the clock and for every

location.

Fig. 6

3. VarioGuide definitions and specifications

VarioGuide

438.020.070.012

Содержание varioguide






























































































































































Результаты поиска

Содержание varioguide

Отзывы:

FENDT varioguide, Руководство оператора, Страница: 22 / 158

Результаты поиска

Содержание varioguide

Отзывы: