Series
FENDT 900 Vario
FENDT 1000 Vario
Type approval number
e1*167/2013*00056 e1*167/2013*00055
Chassis numbers
T950
T527
T951
T528
T952
T529
T953
T530
T954
1.1.2 Notes on documentation
To ensure that the information is structured in a user-friendly manner, the service documentation is divided
into the operator's manual and the workshop manual.
The operator's manual includes a general description as well as instructions for all necessary maintenance
work.
Knowledge of the owner's manual is essential to understand the workshop manual. This is particularly
important for safety instructions. The workshop manual describes repairs to assemblies and components
that will require more effort and suitably qualified specialists to carry out.
Note
This workshop manual provides notes for trained technicians to maintain our tractors. Read and observe
the information in this documentation. This will help you prevent accidents and safeguard the
manufacturer's warranty.
The respective accident prevention rules as well as other generally recognized safety and occupational
health rules must be observed.
The tractor is built solely for the purpose defined by the implement manufacturer. Any other type of use is
considered unauthorized. The manufacturer bears no liability for any damage resulting from improper use.
The user bears this risk alone. Intended use includes maintaining operating, service and maintenance
conditions as specified by the manufacturer.
Operation, maintenance and repair of the tractor may only be carried out by people who are familiar with
this equipment and aware of the associated dangers. Ensure that this documentation is available to and
understood by everyone involved in operation, maintenance and repair. Not observing this documentation
can lead to faults, damage and personal injury, for which the manufacturer assumes no liability. The
prerequisite for the tractor being correctly serviced and maintained is the perfect condition and availability
of all necessary equipment, standard tools and general workshop equipment as well as special tools.
Special tools must only be used where absolutely necessary. The tools are displayed where they need to
be used in each case.
The machine must be maintained according to its proper use. Always replace parts with genuine FENDT
spare parts! When ordering parts, please provide the chassis number as per the most up-to-date spare
parts documentation.
Only parts approved by the manufacturer for that specific purpose may be used for any alterations. The
manufacturer will not accept liability for any damage resulting from unauthorized modifications to the
tractor. Non-compliance invalidates the warranty!
Workshops should also refer to documentation on maintenance work and technical data. Once
maintenance is complete, take a test drive to ensure the vehicle's correct operation and road safety.
We reserve the right to make design changes in light of technical developments.
Notes on repairs
The assembly/disassembly instructions shown correspond to the design status at the time the workshop
manual was drawn up.
GUID-11DBEABB-D4B9-4CA8-9AD9-69470831C9ED [V2]
1. 00-000 Entire vehicle system
1-6
FENDT 900 Vario S4
X990.005.531.013
