![background image](http://html1.mh-extra.com/html/fendt/938-vario-mt/938-vario-mt_workshop-service-manual_4002006041.webp)
Thread
Strength class
8.8
10.9
12.9
M8
25 Nm
35 Nm
40 Nm
M10
50 Nm
75 Nm
85 Nm
M12
85 Nm
125 Nm
145 Nm
M14
135 Nm
200 Nm
235 Nm
M16
210 Nm
310 Nm
365 Nm
Use a washer with the aluminum parts.
1.6.10.3 Coolant quality requirements
AGCO Power Inc. recommends to use coolants that follow in all AGCO POWER engines:
• Arteco, Havoline XLC
• BASF, Glysantin G30
In addition, coolants under other brand names, which can be proved to use exactly the same inhibitor
package as Arteco Havoline XLC or BASF Glysantin G30, are recommended to be used.
If Arteco Havoline XLC, BASF Glysantin G30 or coolant which uses the same inhibitor package is used, the
coolant change interval can be extended from two years up to five years. If any other coolant is used, the
coolant change interval is two years.
Requirements
The coolant used must meet the demands of
standard ASTM D 3306 or BS 6580:1992.
• The cooling mixture must consist 40 - 60 % of
ethylene/propylene-glycol based antifreeze and
water. The best proportion is 50 % of antifreeze
liquid and 50 % of water.
• The water used must be mechanically clean
and not too acid (e.g. swamp water) or too hard
(calciferous well water).
• Check periodically the proportion of antifreeze
(the frost resistance) in the coolant.
• Do not mix ethylene- and propylene-glycol
based antifreeze.
• Change the coolant every two years.
NOTE:
Use only coolant that is a mixture of 40-60% water
and antifreeze. Refer to the engine specification
for the machine, for the specified ratio and the
quantities necessary. Do not use water only for the
coolant.
GUID-EE6ADAB9-3ECA-4D47-9484-6E50DF166BAC-high.eps [High]
Fig. 35
DANGER: Antifreeze is dangerous to health.
Injury to persons.
Do not let antifreeze touch the eyes and skin.
1.6.10.4 Fuel quality requirements
The use of fuels that are not permitted can cause faults in the engine and the exhaust gas aftertreatment
system. These faults can cause:
GUID-5C9A453D-3B9B-4DD7-A6D0-BE179CA6E967 [V3]
GUID-61202AC9-CDDD-41EF-A705-ED13236ADD21 [V11]
1. General
1-38
Rubber Track Tractor
79037495A