FENDT 1290 UD, Руководство по обслуживанию мастерской

Страница: 22 / 41

1.2 General information
1.2.1 Introduction to this service manual
This service manual gives information from engineering tests, operating data, and the latest service
techniques at the time of publication. Read this service manual carefully before doing any service on the
machine.
The photos and illustrations used in this service manual were current at the time of publication. Production
changes can cause machines to vary from the photos and the illustrations. The manufacturer reserves the
right to redesign and change machines as necessary without notification.
WARNING:
Some pictures in this manual show the machine with shields or guards removed to permit
for a better view of the subject of the picture. All shields and guards must be in position
before operating the machine.
Machine movement when in normal use determines right-hand and left-hand.
1.2.2 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given in
millimeters for metric hardware and inches for US hardware.
1.2.3 Table of contents
This manual has a table of contents at the front. The table of contents shows the divisions. The individual
divisions also have a table of contents.
1.2.4 Page numbers
All pages have two numbers, such as 01-25. The first number shows the division. The second number
shows the page in the division.
Page numbers occur on the lower right-hand or lower left-hand corner of each page.
1.2.5 Remove a gib key
Gib keys are tapered keys with a tang on the thick end. A gib key is both a locking component and a hub
retainer. The hub must have a tapered key way that fits the gib key. The gib key will lock the hub into
position requiring no other locking component such as a set screw.
Procedure
1.
Remove paint from both sides of the of the
gib key (1).
2.
Use a crowbar (2) to apply pressure between
the gib key and the hub (3). Drive the hub
away from the gib key by hitting the hub with
a hammer (4).
GUID-482783BD-5E9B-4E5B-813A-A0C6071636A8-high.jpg [High]
Fig. 27
[V]
GUID-D0FA2E94-0D28-42E9-A80B-6BB593BA9687 [V1]
GUID-EBB3FCAE-8712-43A9-BB65-1DB48189C57C [V2]
GUID-9BD2A110-651C-40FC-8D40-EDBAFD670A3C [V1]
GUID-6300C4A8-D25F-4B2F-BDC2-FAC58F99378B [V1]
GUID-1C08B3C7-0C9C-4304-9386-FD4D52F9940C [V2]
1. General
Large Square Baler 1-19
79037317B