FENDT 1290 UD, Руководство по обслуживанию мастерской

Страница: 18 / 41

Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that rotate can cause injury or death.
Stay clear of components that rotate.
Make sure that guards that rotate can rotate freely.
A loose yoke can come off a shaft and result in
injury to persons or damage to the machine.
When you install a quick disconnect yoke, the
spring activated locking pins must move freely and
be in the groove on the shaft. Pull on the driveline
to make sure that the quick disconnect yoke can
not be pulled off the shaft.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 19
Remove spilled oil, antifreeze or fuel immediately
from the steps, platform, and other access areas.
Keep all access areas clean of unwanted materials.
GUID-3B306DB1-0777-4FA6-86F1-895652B4C1DB-high.jpg [High]
Fig. 20
Disengage the tractor PTO. Stop the tractor
engine. Remove the key. Take the key with you.
Apply the flywheel brake. Engage the knotter/
needle lockout before threading the needles,
threading the knotters or you adjust the twine
tensioners.
Injury can occur from threading the needles,
threading the knotters or adjusting the twine
tensioners with a baler in operation.
The needle frame and the knotters can move
when there is not hay in the baler.
When you do work with or around the needles or
knotters always engage the knotter/needle
lockout.
Do not try to remove twine from the bale chamber
or the knotter while the baler is in operation.
GUID-AFDF1E6C-62A8-4132-A343-CB74D561D430-high.jpg [High]
Fig. 21
1. General
Large Square Baler 1-15
79037317B