background image

NOTE: 

Information to make procedures easier.

1.1.5  Safety signs

WARNING:
Do not remove the safety signs. Replace safety signs that you cannot read, are damaged,
or are missing.

Clean the machine surface with a weak soap and water solution before you replace the safety signs.

Replacement safety signs are available from your dealer.
Always make sure that safety signs are in the correct locations and that you can read the safety signs.

Illustrations of safety sign locations are in this section.
Keep the safety signs clean. If necessary, use a weak soap and water solution.

1.1.6  Important safety information

IMPORTANT: 

Any Modifications to the machine or systems not authorized by AGCO will void the AGCO

Warranty. This includes, but is not limited to hitches.

WARNING:
When replacement parts are required for this product, AGCO recommends using AGCO
replacement parts or parts with equivalent specifications including, but not limited to,
physical dimensions, type, strength and material. Failure to heed this warning can get
untimely failures, product damage, personal injury or death.

Failure to obey basic safety rules and precautions can cause personal injuries during product operation,

maintenance, or repair. Know dangerous situations before an injury occurs.
A person must be alert to possible dangers. This person must also have the necessary training, skills and

tools to do these operations correctly.
Incorrect operation, lubrication, maintenance or repair of this product can be dangerous and can result in

injury or death.
Read and understand all the information about the operation, lubrication, maintenance, and repair before

operating on this machine.
The product and this manual give safety precautions and warnings. Bodily injury or death can occur to you

or to other persons if all warnings are not heeded.
Not every possible circumstance that can involve a potential danger can be anticipated. The warnings in

this publication and on the product are, thus, not all inclusive. If a tool or procedure, not recommended by

AGCO, is used, make sure they are safe for everyone.
An operator must make sure the product will not be dangerous or damaged by the operation, lubrication,

maintenance or repair procedures selected. Information, specifications, and illustrations in this publication

come from information available at the time of publication production.
Specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change

at any time. These changes can change the service that is given to the product. Get the complete and

most current information before starting a job. AGCO dealers have the most current information available.

GUID-2FB17168-6A01-47C5-B298-234AF171520B [V7]

GUID-F9D59F68-8014-4549-B346-3FE8D9739D94 [V2]

1. Safety

16

Rubber Track Tractor

ACW3842360_V02

Содержание 1149MT
































Отзывы: