Fender WAYLON JENNINGS PHASER, Руководство пользователя

Страница: 4 / 12

OUTPUT JACK
Low-impedance output connects to amp or next pedal in signal chain.
INPUT JACK
High-impedance input for electric guitar, bass, acoustic guitars with
pickup systems, keyboards and other instruments.
DC POWER CONNECTOR
Connect DC adapter here. Standard center-negative 9VDC jack for
use with appropriate power supplies.
RANGE CONTROL KNOB
Determines what section of the frequency spectrum will be phase
shifted. When set to 10 only high frequencies are affected; when set to
1 only low frequencies are affected.
RATE CONTROL KNOB
Adjusts rate (speed) of the phase-shifting effect.
FEEDBACK CONTROL KNOB
Determines the intensity of the phase-shifting effect. Turn this knob
higher to introduce more feedback and produce a more intense
phase-shifting effect.
PHASE SWITCH
Selects two-, four- or six-stage phase shifting, providing three
vintage phase-shifting flavors to choose from. More phase stages
produce a more pronounced phasing effect.
SWEET SWITCH
Bypasses the PHASE SWITCH to instead provide the “sweet spot” of
the clean signal mixed with phase-shifting tones. Use this switch in
conjunction with the FEEDBACK control knob to blend in the right
amount of phase-shifting effect with your clean signal.
BYPASS FOOTSWITCH/LED
Footswitch turns effect on and off. LED Illuminates when effect is on
and pulses in time with RATE control when effect is on.
BATTERY COMPARTMENT (REAR)
Screw-access compartment houses one 9V battery.