background image

  Electronic tuner

  Wire cutters

  Capo

  Set of automotive feeler gauges (.002” - .025”)

  A 6” ruler (with 1/32” and 1/64” increments)

   A large Phillips screwdriver (Vintage Series basses), or the hex truss rod adjustment wrench that  

  accompanied your bass (modern basses) 

  Mini flat-head screwdriver (Vintage Series basses), or the hex saddle height adjustment  

 

  wrench that accompanied your bass (modern basses)

Great Electric Bass Guitar Setup

While it is certainly possible to give your bass a great setup just using some basic tools and your eyeballs, 

we have found that the job is considerably easier with the right tools. For best results in changing strings and 

performing setups and adjustments, we recommend using the tools listed below.

TUNING

If you don’t own an electronic tuner, you may want to purchase one. It will simplify many of the following 

procedures. If you already have one, just plug in and turn the bass’s volume control all the way up. Pluck 

either an open string or the 12th fret harmonic*, to produce the clearest tone for the tuner. (*A harmonic is 

a “chime-like” tone that is produced by lightly touching the exact mid point of the string at the twelfth fret 

with your finger tip, and plucking the string with the other hand.) 

Note: If you press the string too hard, it will 

choke the string and mute the sound. With a little practice though, you’ll develop the light touch needed to 

make the harmonic ring out.

13

Set-up

Содержание Vintage Style Precision Bass





































Отзывы: