Fender RUMBLE STAGE 800 Скачать руководство пользователя страница 64

Страница: 64 / 67

When performing a firmware update, the user might encounter four scenarios in which a firmware update

cannot be initiated. In such cases, the DISPLAY WINDOW will indicate that Rumble Studio 40/Stage 800’s WiFi

connectivity is not configured, no update is available, the update has failed, or the amplifier update server is

unreachable (

see illustrations below

In addition to the firmware update described above, Rumble Studio 40/Stage 800 offers several user-enabled

start-up modes encompassing factory restore functions. These are:

RESTORE ALL: To restore the factory presets and amp settings contained in the amp’s most recent firmware up-

date, press and hold the PRESET LAYER button (

green arrow in illustration below

) for five seconds while turning

the amplifier on. Note that this function will delete all user-created presets. This function is also accessible as an

“Amp Settings” MENU utility button function (

see page 57

WIFI UPDATE/RESTORE ALL: To combine a firmware update and the start-up option directly above (RESTORE

ALL), simultaneously press and hold the ENCODER and the PRESET LAYER button for five seconds while turn-

ing the amplifier on (

blue arrow in illustration below

). Note that this function will delete all user-created presets.

FORCE UPDATE: To update Rumble Studio 40/Stage 800 if there is a problem with the previously described

firmware update process, a “Force Update” mode can be initiated by pressing and holding the ENCODER and

SIGNAL PATH LAYER button while turning the amplifier on (

purple arrow in illustration below

RECOVERY: To recover the base firmware version (

displayed in “About This Amp,” see page 60

) including presets,

simultaneously press and hold the PRESET LAYER button and X FX utility button for five seconds while turning

the amplifier on (

red arrow in illustration below

). Note that this function will delete all user-created presets.

NO UPDATES AVAILABLE

PLEASE RESTART YOUR AMP

RUMBLE

WIFI NOT CONFIGURED

RUMBLE

AMPLIFIER UPDATE FAILED

PLEASE TRY AGAIN OR

CONTACT CUSTOMER SERVICE

RUMBLE

AMPLIFIER UPDATE SERVER

IS UNREACHABLE

RUMBLE

RESTORE ALL

RECOVERY

WIFI UPDATE/RESTORE ALL

FORCE UPDATE

Содержание RUMBLE STAGE 800




































































Результаты поиска

Содержание RUMBLE STAGE 800

Отзывы:

Похожие инструкции для RUMBLE STAGE 800

Бренды по названию

Популярные бренды

Fender RUMBLE STAGE 800, Руководство пользователя

Результаты поиска

Содержание RUMBLE STAGE 800

Отзывы:

Похожие инструкции для RUMBLE STAGE 800

Бренды по названию

Популярные бренды