Fender RUMBLE STAGE 800 Скачать руководство пользователя страница 50

Страница: 50 / 67

PRESETS MODE

PRESETS mode enables the user to reach any of Rumble Studio 40/Stage 800’s many presets using the MGT-4

Footswitch (

including presets in Setlists; see page 49

). To do this, step on the MODE button until “PRESETS” mode

is activated, as indicated by the illuminated red MODE LED directly to the left of the label “PRESETS.”

When the MGT-4 Footswitch is in PRESETS mode, presets become available in sequential groups of three

called “banks,” with each of the three presets in a bank assigned to FUNCTION buttons 1, 2 and 3. To move “up-

ward” through subsequent banks of three presets, step on FUNCTION buttons 2 and 3 simultaneously (these

are labeled on the footswitch as “BANK UP” for this purpose). To move “downward” through preceding banks

of three presets, step on the MODE button and FUNCTION button 1 simultaneously (these are labeled on the

footswitch as “BANK DOWN” for this purpose).

When the bank containing the desired preset is reached, select the desired preset within that bank by stepping

on its corresponding FUNCTION button. When the desired preset has been selected, its corresponding red

FUNCTION LED will illuminate, and the DISPLAY WINDOW will show the preset in use (

see illustrations below

Note that when activating PRESETS mode, the MGT-4 Footswitch will automatically set itself to whatever Rumble

Studio 40/Stage 800 preset is already set on the amp.

This preset will be assigned to the footswitch FUNCTION

button corresponding to the preset’s position within its bank (1, 2 or 3). For example, if the amp is set to preset

number 33, the MGT-4 Footswitch in PRESETS mode will also be set to preset number 33 and will assign that

preset to FUNCTION button 3 (the third preset in the bank containing presets 31, 32 and 33).

Step on the footswitch MODE button (green arrow) to cycle through modes until red “PRESETS” MODE LED illuminates. A “bank” of three

presets containing whichever preset is already set on the amp is assigned to FUNCTION buttons 1, 2 and 3 (yellow arrows), each with its

own red FUNCTION LED to indicate use. The DISPLAY WINDOW also shows the preset in use (preset 1 in this illustration).

In PRESETS mode, move up through succeeding preset banks (“BANK UP”) by stepping on FUNCTION buttons 2 and 3 simultaneously (double

arrow at right). To move down through preceding preset banks (“BANK DOWN”), step on MODE button and FUNCTION button 1 simultane-

ously (double arrow at left). Select a preset within its bank by stepping on its corresponding FUNCTION button (button 1 in this illustration).

FX 1

REC/DUB

PRESETS

EFFECTS

LOOPER

FX 2

PLAY/STOP

FX 3

UNDO

BANK DOWN

MODE

HOLD

TUNER

BANK UP

MGT-4

ASSY. P/N 7710238000

FX 1

REC/DUB

PRESETS

EFFECTS

LOOPER

FX 2

PLAY/STOP

FX 3

UNDO

BANK DOWN

MODE

HOLD

TUNER

BANK UP

MGT-4

ASSY. P/N 7710238000

Содержание RUMBLE STAGE 800




































































Результаты поиска

Содержание RUMBLE STAGE 800

Отзывы:

Похожие инструкции для RUMBLE STAGE 800

Бренды по названию

Популярные бренды

Fender RUMBLE STAGE 800, Руководство пользователя

Результаты поиска

Содержание RUMBLE STAGE 800

Отзывы:

Похожие инструкции для RUMBLE STAGE 800

Бренды по названию

Популярные бренды