Fender Passport Executive PR 692, Руководство пользователя

Страница: 7 / 20

fender.com fender.com
7 7
disply freq
channl
loc set loc off
loc on
Passport Executive Passport Executive
Telecommunications Licensing Telecommunications Licensing
•
The Transmitter channel must match the receiver
channel displayed on the Passport base unit . To
change the Transmitter channel, first use the
buttons to select a channel, then press the SET button
to confirm your selection.
•
You can lock the Transmitter buttons if desired. After
selecting the Display Option (above), use the
buttons to select either "LOCK ON" or "LOCK OFF,"
then press the
SET button to confirm your selection.
To unlock, press the SET button and select "LOCK
OFF."
•
The Transmitter can display either the transmitting
channel or frequency. To change the display, press the
SET button once. Next use the buttons to select
either "CHANNEL" or "FREQUENCY," then press the SET
button to confirm your selection.
Channel Selection
Display Options
Button Lock
Wireless Transmitter
DISPLAY—
Displays the transmitting channel (or frequency)
and battery strength.
GAIN—
Set at the factory for optimal use. Decrease GAIN
only if the Passport Executive sounds distorted even at low
volume settings. Increase
GAIN only if the Passport Executive
sounds too quiet even at high volume settings.
BATTERIES—
Insert two AA batteries as shown.
POWER—
Wireless Transmitter ON-OFF switch.
INPUT JACK—
Plug the Headset in here.
SET—
Press to activate menus and confirm selections.
UP / DOWN—
Press to change channels (frequencies) and
make menu selections.
Headset Microphone
HEADSET—
Plug into the Wireless Transmitter Input Jack
.
A statutory license may be required to operate this equipment in certain areas. Consult your national authority for possible require-
ments. Licensing of Fender equipment is the user’s responsibility, and licensability depends on the user’s classifi cation, application,
and frequency selected. Fender strongly urges the user to contact the appropriate telecommunications authority for any desired
clarifi cation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause unde-
sired operation.