Fender G-DEC 3 MUSTANG FUSE 2-0, Руководство пользователя

Страница: 5 / 12

2.0
5
f e n d e r . c o m
Click on any of the four slots { A } to the right of the amplifier icon to select an effect and open the Rack Effects edit screen. These
effects are located after the amp model in the signal path to provide a sound similar to effects that are connected through the
effects loop of an amplifier, or added at the recording console. NOTE: Mustang™ amplifiers also allow you to change the order of
effects (which affects their sound) by dragging the effect icons to different slots { A }.
B. RACK EFFECT SELECTOR — Click on the drop down menu to
select an effect, or use the up/down arrows to scroll through
effects in the currently selected effect category {A}. Effects are
separated into four categories: Post Gain, Modulation , Delay
and Reverb .
♫
You can have a total of up to four effects active at any
time, but you can have only one of each "category" active
at a time. For example, you can have a reverb effect either
before or after the amplifier, but not both.
C. EFFECT SETTINGS — Click and drag any of these knobs to
adjust the rack effect settings. The precise level of each setting
will be displayed under the Rack Effect Selector {B} window.
♫
You can also adjust the knobs on the smaller version of
the rack effect icon below, which is convenient when you
are in the Preset Editor window.
D. DELETE — Click on the "X" to remove the effect from the current
preset.
E. BYPASS
— Click on the on-off switch to turn the effect on-off
(bypass). The red light next to the switch indicates when the
effect is on or off.
♫
You can also click the on-off switch on the smaller version
of the rack effect icon below.
Rack Effects