FEND Super + Lights, Руководство пользователя

Страница: 7 / 16

7
J
REMOVE LIGHT
PUSH
I
LIGHT PLACEMENT
TAILLIGHT
(RED)
FRONT LIGHT
(WHITE)
4. Switching Modes: The light features three modes: Steady, Pulse, and Flash. To
switch between these modes, quickly press the power button for 1 second each time.
HOW TO INSTALL/REMOVE LIGHTS FROM HELMET
1. Choose Correct Light: The Front Light (White Light) should always be placed on
the FRONT of the helmet, and the Taillight (Red Light) should always be placed on the
BACK of the helmet (See Figure I) .
2. Install Lights Onto Helmet: Locate the designated slots for the lights on the
FEND Super helmet and push the lights into the slots until an audible click is heard,
indicating they are securely locked in place.
3. Remove Lights From Helmet: From the inside of the helmet, push outward on the
back surface of the light until it snaps out of place (see Figure J) .
HOW TO CHARGE THE LIGHTS
1. Locate Charging Port: Peel back the protective rubber layer on the back of each
light to uncover the USB-C port (see Figure G on page 6) .
2. Charging Time: It takes approximately 1.5 hours to fully charge the lights with a
completely drained battery.
3. Charging Indicator: The LED light will blink while charging and will switch off once
charging is complete.