19
SETTINGS
To enter the settings mode, press (long) the
Settings
button.
There are currently 3 items available in the settings menu. To select the desired item, shortly
press the
Settings
button.
To change the settings of the selected item, press the
UP
or
DOWN
arrow
.
To exit the setting mode, shortly press the red button
ON
.
The settings will be saved.
Alarm sound (letter “A”)
Audio notification of the controller can be enabled or disabled. The setting is indicated by the
speaker icon.
Update mode (letter “U”)
Sets the data update interval.
Automatic mode updates the data every minute but has a higher power consumption.
Automatic mode updates the data every hour, saving battery.
Limit of the voltage of the fence
Pulse voltage limit on the fence can be set. If the voltage drops below the required limit (3 kV),
an alarm is triggered.
8.2. Control of remote controller
MAIN SCREEN
The energizer is controlled from the main screen.
Use the
UP
and
DOWN
arrows
to select the desired energizer.
When the
Energizer ON/OFF
or
Energizer Power
button is pressed the controller
immediately sends the command to the energizer.
Pulse voltage, or battery voltage can be monitored on the display.
To switch battery or pulse information, press the
Data Selection
button.
You can update the current energizer data at any time outside
the interval by pressing the button on the controller.
