Femco WEATHERBRAKE 307022174, Инструкция по эксплуатации

Страница: 6 / 7

1. Locate holes in door post and cut holes in the fabric.
2. Hold door (A) to door post and bottom of the wind-
shield.
3. Mark location of holes in the door post to the door.
4. Cut 5/8” slots next to wire frame of door and attach to
door post using four (4) #10 x 3/4” bolts, clips and nuts.
5. Tie door flap (B)
6. Tighten all bolts.
DOORS
A
B
1. Mark location of holes in windshield to side window (A).
2. Cut 5/8” slots next to wire frame of window and attach
to windshield using #10 x 3/4” bolts, clips and nuts.
3. At location (B), cut 5/8” slots inside window and top of
door and attach using #10 X 3/4” bolt, clip and nut.
4. Repeat procedure for other side.
5. Tighten all bolts.
SIDE WINDOWS
A
B
1. Assemble door latches as shown using two (2) 1/4” x
3/4” bolts and nuts.
2. Position under bottom rear of door.
3. Door is to be set firmly in loop of door latch. Change
position up or down with adjustment holes if necessary.
4. Mark location for one (1) of the two (2) holes and drill
one (1) 9/32” diameter hole
5. Attach to fender using one (1) 1/4” x 1” bolt and nut.
6. Tighten all bolts.
DOOR LATCH