Femco WEATHERBRAKE 2175, Инструкция по эксплуатации

Страница: 4 / 8

1. Slide side am (A) into side 3” hem of motor cover.
2. Attach side arm to yoke using one (1) 3/8” x a1” bolt
and nut. Head of bolt up, nut down
3. Attach side arm bracket (B) to side arm using two (2)
1/4” x 3/4” bolts and nuts. NOTE: Door post is to be
straight up and down, yoke and side arm parallel
to tractor. Make adjustments if necessary
.
4. Drill a 9/32” diameter hole in fender and attach side
arm bracket using one (1) 1/4” x 1” bolts, fender
washer and nut.
5. Tighten bolts.
SIDE ARM
1. Insert yoke (A) into top 3” hem of motor cover.
2. Attach yoke to yoke bracket using two (2) 1/4” x 3/4”
bolts and nuts.
3. Attach end of yoke to door post using one (1) 1/4” x 1”
bolt and nut. Bolt head inside, nut outside.
YOKE
1. Arrange motor cover (A) over hood of tractor.
2. Slide 3” hem of motor cover down over top of door
post.
MOTOR COVER
A
A
B