6
COL
OUR
INDIC
A
TION
MENU FEA
TURE
HO
W T
O A
CCESS
S
AFE CLEANING
MODE
This feature allows you to clean your control and mix
er
without turning on your mix
er during cleaning.
PRESS & HOLD
the control for 5 seconds until the GREEN light a
ppears, then release.
This will disable the control for 45 seconds to allow the control to
be cleaned without
turning on.
To cancel, press the control again.
PLEA
SE NO
TE THERE IS A DELA
Y BETWEEN THE 'S
AFE CLEANING MODE' AND 'DIA
GNOS
TIC TES
T' — PLEA
SE DO NO
T RELEA
SE PRESSURE
DIA
GNOS
TIC TES
T
This feature will run a series of diagnostic checks with
lights indicating if your control is OK or malfunctioning.
Please see troubleshooting page in the Installation Guide
if error occurs or contact the Felton T
echnical T
eam on
0800 743 358.
PRESS & HOLD
the control for 18 seconds until ORANGE light appears,
then release.
A series of lights will flash to indicate which stage the diagnostic is checking.
To cancel, press control again
.
COL
OUR INDIC
A
TOR
RED LIGHT
V
alve is hot
GREEN LIGHT
V
alve is off
BL
UE LIGHT
V
alve is cold
LIGHT OFF
System check complete
THE FUNCTIONS BEL
O
W ARE ONL
Y AD
JUS
TABLE FOR
1 HOUR
AFTER INITIA
TION
CONSUL
T FEL
T
ON RECOMMENDED INS
TALLER UPON INS
TALLA
TION
MAXIMUM
TEMPERA
TURE
This feature allows you to adjust to your desired maximum
temperature to avoid accidental scalding, especially for
the elderly and children.
Maximum temperature on default is 45°C.
PRESS & HOLD
until light starts flashing WHITE.
R
elease immediately to access.
TURN
to adjust desired maximum temperature.
PRESS
again to save maximum temperature.
Maximum default temperature is 45ºC.
THERMAL
DISINFECTION
This feature flushes out the pipes at the hottest
temperature your system will allow
. This will clean
through any limescale and clear any potential bacteria.
Note:
If your thermal disinfection indicates a red light at the
end of the disinfection, your system has not provided hot
water greater than 55ºC. This can be ignored as it does not
affect the function of the thermal disinfection process.
A
TTENTION: RISK OF SCALDING
PRESS & HOLD
for appro
x 20 sec until light starts flashing RED
.
Release immediately to access.
Flashing RED:
Thermal disinfection flushes out hot water
.
A
utomatic stop after 2 minutes. RED flashes.
Press again to finish thermal disinfection.
To stop disinfection during cycle:
PRESS ONCE.
RES
TORE
FA
CT
OR
Y SETTINGS
This restores all settings back to the original default
settings ex
cept for flow memory.
PRESS & HOLD
until light starts flashing BL
UE.
Release immediately to access.
Flashing BL
UE twice:
Factory setting is restored.
MAXIMUM W
A
TER
FL
O
W TIME
This water saving feature allows you to set the unit to
switch off automatically after a maximum run time. Y
ou
can set the maximum from 5 seconds to 30 minutes.
PRESS & HOLD
until light starts flashing PINK.
Release immediately to access.
PRESS
to set desired water flow time
Flashing PINK twice:
Setting is saved.
HY
GIENE
FUNCTION
This feature is used for setting up the shower to turn on
and regularly flush the system through. The complete
flush will automatically stop after 2 minutes.
Note:
If your thermal disinfection indicates a red light at the
end of the disinfection, your system has not provided hot
water greater than 55ºC. This can be ignored as it does not
affect the function of the thermal disinfection process.
PRESS & HOLD
until light starts flashing YELL
O
W
.
Release immediately to access.
PRESS ONCE
to adjust interval flushing at the number of flashes.
Flashing YELL
O
W twice:
Setting is saved.
FLA
SHES
1st
2nd
3rd
4th
5th
TIME
1 day
2
days
3
days
7
days
Inactive
AMBIENT LIGHT
SETTINGS
This feature is used for setting up the display light when
the system is off
.
PRESS & HOLD
until light starts flashing LIGHT BL
UE.
Release immediately to access.
PRESS ONCE
to choose the desired colour
.
Flashing BL
UE LIGHT twice:
Setting is saved
IMPOR
TANT
: Once powered up
, the control must be programmed within one hour
.
If the activation set up is not complete within one hour
, power off the unit, leave it for 20 minutes, then restart agai
n.
AD
V
ANCED A
CTIV
A
TION SET UP
To access each setting, PRESS & HOLD until colour changes in
the order shown
, then release to access desired menu setting.
Malfunction of the
temperature sensor
.
Please contact Felton
Technical T
eam on
0800 743 358.
3 x
ORANGE
flashes
2 x
ORANGE
flashes
The control unit is OK.
Содержание TATE
Страница 1: ...USER GUIDE TATE Digital Mixer...
