Hold the rail and
position the bottom
bracket into the desired
position (max distance
655mm C-C).
Screw the plastic
tightener into place.
Fit bracket caps.
Screw the elbow into the water outlet (wingback).
Sealant required on thread to achieve a water tight
seal.
For Mains Pressure, fit flow restrictor into the
handpiece first.
Screw the hose onto the elbow and
handpiece and attach the handpiece to the slider on
the rail.
1.
3.
4.
5.
2.
Max 655 Centre - Centre
Max 655
HOW TO INSTALL
INSTALLING INTO STUD/NOG...(RECOMMENDED)
Remove the bracket
cap and unscrew the
plastic tightener.
Remove the
adjustable bracket from
the rail.
Mount the adjustable
bracket into the top
bracket position (either
into a new pre-drilled
hole or existing hole).
Fit soap dish onto the
rail from the bottom.
Slide the rail into the
top bracket.
6.
8.
9.
7.
INSTALLING INTO CONCRETE/BRICK WALL...
Pre-drill holes to the desire position
(Max 655 Centre - Centre) and fit the
wall anchors then follow the above
instruction.
Mount the bottom bracket
into place. Ensure that
both rail and bracket are
secured. It is recommend-
ed that silicone sealant be
used to seal the fixing
brackets.
