685mm C-
C
685mm C-
C
HOW TO INSTALL
INSTALLING INTO STUD/NOG...(RECOMMENDED)
INSTALLING INTO CONCRETE/BRICK WALL...
1.
5.
6.
7.
2.
3.
4.
Untighten the grub
screws from the rail
with an allen key.
Mount the rail onto the brackets in place.
Ensure that both rail and bracket are secured.
It is recommended that silicone sealant be used
to seal the fixing brackets.
Pre-drill holes to 685 Centre - Centre and fit the
wall anchors then follow the above instructions.
Tighten the grub screws
on rail with an allen key.
Screw the elbow into the water outlet
(wingback). Sealant required on thread
to achieve a water tight seal.
For Mains
Pressure, fit flow restrictor into the
handpiece first.
Screw the hose onto
the elbow and handpiece and attach the
handpiece to the slider on the rail.
Remove the
brackets from the
rail.
Mount the brackets into position
(685 Centre - Centre).
It is essential that the
mounting brackets are
installed in a vertical
position as shown.
