Felt VR SERIES, Техническое руководство

Страница: 7 / 10

ROUTING
BOTTOM BRACKET
CABLE GUIDE
ROUTING
BOTTOM BRACKET
CABLE GUIDE
11 10
Once the cables have been crossed over each other once, carefully insert the
cable guide while making sure not to pinch the cables. The front derailleur cable
will run in the slot on the non-drive side, while the rear derailleur cable will run
along the drive side.
Once the cables are place in their proper slot, press the plastic cable guide into the
frame to until the guide sits flush with the underside of the bottom bracket. If you find
any resistance, make sure the cables aren’t being pinched.
Take the front derailleur cable and thread through and under the circled bridge in
the cable guide. Leave a loop of excess cable on the end closest to the headtube.
You will now take the front derailleur cable and thread it into the circled hole, and
out the front derailleur cable port found directly parallel to it on the top of the
bottom bracket shell.