6
TROUBLESHOOTING
STORAGE & CLEANING
Problem
Possible cause
Solution
No ‘power on’ lamp (red LED)
Machine not switched on
Switch on machine at the side and at the wall socket
No ‘ready’ lamp after a long period
(green LED)
Machine is in a hot or humid area
Move the machine to a cooler and dry area
The Power LED is flashing red and the
Ready LED (green) has turned off
The laminator has gone in to Auto Shut
Off mode
Press the ON/OFF switch. The machine will reset
itself
The ready lamp (green) and the Power
LED (red) have turned off
The laminator is in Auto Shut Off mode
Press the ON/OFF switch. The machine will reset
itself
Pouch does not completely seal the item
Item may be too thick to laminate
Maximum document thickness equals
0.040” / 1mm
Pouch has waves or bubbles
Pouch thickness may be incorrect
Laminator accepts 75 - 80 micron pouches
Pouch is lost in the machine
Pouch is jammed
Press release lever and pull out the item by hand
Jamming
Pouch was used ‘open end’ first
Pouch was not centred on entry
Pouch was not straight upon entry
Empty pouch was used
Pouch is damaged after lamination
Damaged rollers or adhesive on rollers
Pass cleaning sheets through the machine to test
and clean rollers
PRODUCT REGISTRATION / WORLDWIDE WARRANTY
Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp cloth. Do not use solvents
or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm – run
the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning sheets are used
with the machine regularly. (Cleaning sheet order code #5320601).
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under Fellowes’ Warranty
are in addition to other rights and remedies under a law in relation to the machine.
Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from product news,
feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine. Fellowes
warrants all parts of the laminator to be free of defects in material and workmanship for 1 year from the date of purchase by the original
consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will be repair or replacement, at
Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorised repair. Any
implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty
period set forth above. In no event shall Fellowes be liable for any consequential damages attributable to this product. This warranty gives you
specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid
worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services
under this warranty, please contact Fellowes or your dealer.
W.E.E.E.
This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of this
product please ensure that you do so in accordance with the European Waste of Electrical and Electronic Equipment
(WEEE) Directive and in compliance with local laws relating to this directive.
For more information on the WEEE Directive please visit www.fellowesinternational.com/WEEE
