Page 6
Lotus
RT
product assembly
step 1c
Unbox and determine sitting height position
• Use two people to lift the base and worksurface out of the box. (Image A)
• Carefully place the base and worksurface onto the table. (Image B)
• Determine your desired sitting position. (Image C)
Note: If your desired sitting position is in the center of the table, choose a base mounting position that
Image A
Image B
Image C
Image D
step 2
Clamp
• Insert two M8 screws (J) into the clamp. (Image E)
•
Ensure the tip of the screws align to the holes in the clamp
support plate. (Image F)
• Tighten the M8 screws (J) with the 6mm Allen Key (I) until
the clamp support plate is secured to the desk.
J
I
clamp
zip tie
clamp
support
plate
J
Image E
Image G
Image H
Image F
step 3
• Remove the zip tie from the lever on the right side of the platform. May require the use of scissors
(Image G)
• Engage the lever and raise the workstation.
• (Optional) If you’d like the lever on the left side of the platform, remove the (2) M6x10mm bolts holding
the handle with the 4mm Allen Key (C). Re-attach to the left side. (Image H)
Содержание esi LOTUS-RT1-BLK
Страница 2: ...Page 2 Lotus RT intentionally left blank ...
