Fellow ODE NGAAUK, Безопасность и обслуживание

Страница: 6 / 9

11 10
To wash the catch, wipe gently with a soft cloth and warm soapy
water. Dry with a dry cloth after cleaning.
Wipe grinder exterior and load bin with a soft, damp cloth.
AUTOMATIC CLEANING
A fast way to clean your grinder is using grinder cleaning tablets
like Urnex Grindz™ grinder cleaning tablets. These are designed to
prevent clogging by freeing coffee particles stuck to the burrs and
absorbing/removing odors and coffee oil residue.
To use cleaning tablets, make sure all beans are run through your
grinder by running it for 10-20 seconds. Use the cleaning tablet
instructions to place appropriate amount into grinder. Adjust the
grind setting to 11 and press the power button to run the grinder.
Grind all of the tablets into the catch. Once complete, we
recommend grinding approximately 30 g coffee to remove any tablet
residue. Discard the ground tablets/coffee from the catch and clean.
MAINTENANCE
Any other servicing should be performed
by an authorized service representative.
CLEARING A JAMMED GRINDER
On occasion, Ode Brew Grinder may become jammed and stop
grinding. When this occurs, the grinder will stop grinding before
it has finished all the coffee in the hopper and beep “SOS”
(save our ship).
Minor jams can be cleared as follows:
1. Check that the catch is empty. Turn the grinds dial to setting 11.
2. Tap the grinder firmly on the side several times and shake.
3. Press the power button and continue to firmly tap the side of the
grinder for several seconds. If grinding resumes, the jam is cleared.
If not, proceed to the instructions for clearing a major jam.
Major jams can be cleared as follows:
1. Unplug the grinder.
2. Remove the burrs as instructed in the “Removing and Replacing
Burrs” section of this manual.
3. Clear coffee from the grinds chamber and discard.
4. Inspect burrs for coffee beans or foreign materials (rocks, sticks,
unroasted coffee bean, etc.) that may be stuck. Remove stuck
coffee beans and clean burrs as instructed in the “Cleaning” section
of this manual.
5. Reinstall burrs. Run grinder without coffee for 5 seconds to check
that it operates as expected. The grinder should spin quietly and at
an even speed. If the grinder is making an unexpected noise, repeat
this process and carefully inspect to ensure that all coffee particles
have been cleared out. If the problem persists, please email Fellow
customer service at hello@fellowproducts.com.
REMOVING AND REPLACING THE GRINDING BURRS
CAUTION: The Grinding Burrs are sharp, please handle carefully!
1. Adjust your grind setting to 11, unplug your grinder, and empty it of
coffee.
2. Start by removing the faceplate of the grinder. The faceplate simply
snaps on and off. Pull gently on the faceplate for it to snap off. See
Diagram B for reference.
3. Using a Phillips-head screwdriver, unscrew the four larger size screws
that have arrows pointing to them. See Diagram C for reference.
4. Pull on grind dial to remove the grinds dial assembly.