Assembling your deluxe canister steam system
JET NOZZLE / SCRAPER / SQUEEGEE / TRIANGLE BRUSH
1.
Select one of the three accessories (Jet Nozzle shown as example) and
push onto the Steam Nozzle (A).
2.
Rotate accessory until the yellow lock/release button snaps into the
accessory hole (B).
NOTE:
The Jet Nozzle, Scraper and Triangle Brush can be connected to the
end of an Extension Wand for reaching high or diffi cult spots. Connect
the Extension Wand (or Wands) as outlined on Page 8, then connect your
desired accessory to the Wand in the same way as you would normally
connect to the Steam Nozzle.
7
Before steaming any fl ooring, it is recommended to consult the
manufacturer’s guidelines. For fl ooring in question, always test on a small
inconspicuous area before proceeding.
A
B
UTILITY BRUSHES / ANGLED NOZZLE / SCRUB PAD
NOTE:
Accessories connect to the Jet Nozzle, not the Main Nozzle.
1.
Firmly press accessories onto tip of Jet Nozzle. Press it on as far as
possible to prevent steam leakage.
2.
To remove accessories, simply grip it fi rmly and pull it off Jet Nozzle.
