FELLER ENGINEERING SS 242, Руководство пользователя

Страница: 22 / 24

CLEANING AND MAINTENANCE
IRONING TIPS
Before cleaning, firstly disconnect the power outlet and let the appliance
cools down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth
or a non-abrasive (liquid) cleaner.
NOTE
: Do not use chemical, steel, wooden or abrasive cleaners to scrape the
soleplate.
2.
Clean the upper part of iron with a soft damp cloth. Wipe the water
drop on the steam generator and the thermal insulation cushion with
dry cloth.
3. When do not use the appliance for a long time, pour out the water in the
tank, and store the iron on the thermal insulation cushion.
4. Wind the steam supply hose and power cord around the cord winding
groove and secure it by the cord clamps.
NOTE
: Make sure that the whole steam station iron can be lifted up by grasp-
ing the iron’s handle after the iron is properly secured on the thermal insula-
tion cushion.
– Always check first whether a label with ironing instructions is attached
to the article. Follow these ironing instructions in any case.
– The iron heats up quicker than cooling it down, therefore, you should
start ironing the articles requiring the lowest temperature such as those
made of synthetic fiber.
–
If the fabric consists of various kinds of fibers, you must always select
the lowest ironing temperature to iron the composition of those fibers.
–
Silk and other fabrics that are likely to become shiny should be ironed
on the inner side. -Velvet and other textures that rapidly become shiny
should be ironed in one direction with light pressure applied. Always
keeps the iron moving at any moment.
– Pure wool fabrics (100% wool) may be ironed with the steam iron. Pref-
erably set temperature dial to the maximum position and use a dry
cloth as a mat.
– -Never iron over zip, rivet in the cloth. This will damage the soleplate.
Iron around any such object.
NOTE
: When ironing woolen fabrics, shining of the fabric may occur. So it is
suggested that you should turn the article inside out and iron the reverse side. 10