6
7
- You can make grills and meals not containing much
water and without oils.
- When you have finished cooking/grilling processes
disconnect the power cord from wall socket and allow
it to cool down before cleaning.
- Avoid operating at higher temperatures since any
food that has burned on the non-stick surface may result in discoloration of
the surface.
- Such a discoloration will change the appearance only, but not the
cooking performance of your pan.
- You can control the steam occurring inside of your pizza pan, owing to a
steam outlet channel located on the lid.
NOTE:
1: Use your electric pizza pan with its thermostat controller attached.
2: Ensure that the supply cord is properly away from the cooking surface
when in use.
- The cooking time depends on the type and quantity of food that is to be
cooked as well as the degree of cooking, please base these times on your
own experience.
Using Thermostat Controller:
- Thermostat controller is a precision-adjustment device, so avoid dropping
it down, striking, or stroke.
- Do not use a thermostat controller belonging to any other appliances.
- Make sure to place the thermostat controller in its place properly. While
placing or removing, always grasp the controller, but never pull by the
power cord.
- Thermostat indicator stops at the positions of “OFF” and “5”. Do not turn
it beyond these limits.
- Do not use a damaged or overheated thermostat controller, and take it to
a nearest
Felix Authorized Service
for repair.
- Before mounting/removing the controller make
sure that the temperature setting is at the position
“OFF”, otherwise it may result in damage or
overheating.
- Make sure that the variable temperature switch is
set at the position “OFF” before attaching/removing
controller, otherwise a breakdown or overheating may occur.
CLEANING
&
CARE
- Before cleaning and care, turn the temperature
switch to “OFF” and unplug the appliance from
the wall socket and allow it to cool down.
- Do not remove the thermostat from the device
until has cooled down, as the temperature sensor
is still very hot after use.
- After each use, wipe off your pizza pan covered with non-stick coating.
- Under no circumstances should device and thermostat controller be
immersed in water for cleaning.
- You can remove the remaining foods and wipe the cooking surface plates
with a slightly damp cloth or paper serviette, when the surface is still warm.
- Wash your pizza pan and glass lid using a soft sponge and with tepid
water and soap, then wipe off and dry completely. NEVER wash the
pizza pan in a dishwashing machine.
- After you have finished complete cleaning of your pizza pan, wipe off the
wetness with a soft cloth and apply a fine layer of oil on the surface.
- You can clean and wipe off the thermostat controller with a soft and dry
cloth or serviette.
Product Life: 7 years
TECHNICAL SPECIFICATIONS
220-240V ~ 50 Hz
1400 W
The product is in compliance with the EEE Directives.
WEEE
This product contains recyclable materials that compliance with the WEEE
directives. Do not dispose this product as unsorted municipal waste. Please
contact your local municipality for the nearest collection point.
Manufacturer / Importer:
Arzum Elektrikli Ev Aletleri San. ve Tic. A.Ş.
Otakçılar Caddesi No: 78 Kat: 1 B Blok No: B1b
Eyüp 34050 İstanbul Türkiye
Made in China
Tel: +90 212 467 80 80 Fax: +90 212 467 80 00
www.felix.com.tr
