F-920 Instruction Manual rev. 6-6-2016
1554 NE 3
rd
Ave, Camas, WA 98607, USA
15
Phone: (360) 833-8835
[email protected]
www.felixinstruments.com
File > Review
File Review displays a list of files on the SD card and allows you
to view the data in the files. Use the Up/Down arrows to scroll
between files and the right arrow to enter the selected file. The
data.csv file is the F-920 default file used to store data when no
other file is selected.
After selecting a file name, the measurement mode with time of
the measurement and gas concentration will appear for Trigger
mode readings. Use the Up and Down arrows to highlight a
measurement and the Right arrow to enter the measurement
and see the more detailed data, including Date, Time, O
2
and
CO
2
concentrations, Mode and Sample Volume.
Transferring Files
Open the saved data files on the SD card using Microsoft Excel
or Notepad. Data files are saved as .csv file extensions (comma
separated values). The following figure is an example data
spreadsheet. Data values included are the date and time of the
measurement, the measurement mode, the CO
2
concentration
in percent, the O
2
concentration in percent, the temperature of
the gas stream in degrees Celsius, the relative humidity (RH) of
the gas stream in percent, the flow rate of the gas stream in
milliliters (mL) per minute, and GPS data.
Delete
Data . csv
16_04_04_0 . csv
