Quick Start Guide FELIX BIOprinter
Page
1
1
Safety
General safety
-
Keep children under the age of 14 out of reach of the printer
-
FELIXprinters are only suitable for professional use.
Considerations when in operation.
-
Don’t leave the printer unattended, before making sure the
first layer is printed properly
-
Don’t lean on the printer.
-
Be careful with long hair and wide clothes.
-
Don’t transport the printer.
-
Make sure all moving parts can move without any
obstructions.
-
Don’t remove any objects from the hot plate while printing.
-
Caution with any moving parts that move in the X, Y and Z
direction. Moving parts can have a pinching hazard.
Electronic safety
-
Only use the power supplies and cables supplied by
FELIXprinters. Always turn off and unplug the printer before
performing maintenance or modifications.
-
The power supply meets all CE mark regulations and is
protected against short-circuit, overload, over voltage and
over temperature.
Printer placement
-
Place the FELIXprinter on a stable table/desk or something
with a similar height.
-
Place the printer on a height where children cannot reach it.
Use the FELIXprinter in a dry environment at room
temperature.
Ventilate
-
Depending on the printed material, proper ventilation
while printing is advised. In some cases small
concentrations of harmfull vapor can be released. This can
(in some cases) cause headaches, fatigue, dizziness,
confusion, drowsiness, malaise, difficulty in concentrating,
and a feeling of intoxication.
Caution with heater elements
-
There is a potential risk of burn, as the print head and bed
addon module can reach temperatures of up to 50°C and
the standard heated bed of up to 100°C.
-
Don’t place objects on the heated bed, not even when the
printer is turned off.
-
Always let the printer cool down for at least 5 minutes
before doing maintenance or modifications
.
Caution UV curing module
-
The UV curing module, can cause harm to eyes and skin
when looking into it directly and when being exposed for a
long time. Always wear eye protection with proper UV
protection rating. Also make sure that the skin is not
exposed within 1 meter of the printer when the printer is in
operation.
UV
