Felisatti P52246, Руководство пользователя, Страница: 8 / 12

Overloaded
The tool is operated in a manner that causes it to draw an abnormally high current.
In this situation, turn the tool off and stop the application that caused the tool to become overloaded.
Then turn the tool on to restart. If the tool does not start, the battery is overheated. In this situation, let
the battery cool before turning the tool on again.
Low Battery Voltage
The remaining battery capacity is too low and you will need to remove and recharge the battery.
Indicating the Remaining Battery Capacity
Press the check button on the battery cartridge to indicate the remaining battery capacity. The
indicator lamps light up for a few seconds.
NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ
slightly from the actual capacity.
Operation
Switch Action
CAUTION: Before installing the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the
switch trigger. Release the switch trigger to stop.
8