450
200
200
450
Figure 3.3-1 Installation space of one inverter
·
Do not open the cover of the inverter or replace any part as incomplete inverter
may cause electric shock and damage the device during operation.
·
Inverter cannot be installed near flammable, explosive or strong electro-
magnetic equipment.
Ensure there is sufficient space for heat-releasing. Generally, space requirement should be met
as below:
Lateral
Top
Bottom
200mm
450mm
450mm
Minimum clearance
Table 3-3-1 Detailed installation space
Figure 3.3-2 Installation position
07
08
√
no rain exposure
no snow bulid
no direct sunlight
rain exposure
snow bulid
direct sunlight
The installation of inverter should be protected under shelter from direct sunlight or badweather
like snow,rain, lightning etc.
3.4 Mounting
The inverter is suitable for mounting on concrete or other non-combustible surface only.
Step 1.
Please use the mounting bracket as a template to drill 4 holes in the right positions (10mm
in diameter,and 80mm in depth). Use M8 expansion bolts in accessory box and fix the mounting
With a 12mm drill
bracket onto the wall tightly.The installation of inverter support is shown in
Figure 3.4-1.
·
The inverter is heavy, please be careful when removing it from the package.
·Be careful when mounting because the inverter is very heavy.
NOTE
Step 2.
Lift the inverter to fix it on the installation bracket, We can prevent theft by locking.
See Figure 3.4-2.
Figure 3.4-2 Installing an Inverter
Figure 3.3-3 Installation position
Hybrid solar inverter
Hybrid solar inverter
Figure 3.4-1 Install the inverter hanging plate
M8
√
Make life full of hope
