11
HNC3 825 / HNC3 825 perform
Safety instructions
Note
Ear protection:
Protection from noise emissions by the machine.
2.7
Other risks
The machine has undergone a hazard analysis. The design and construction of
the machine are based on the results of this analysis and correspond to state-of-
the-art technology.
The machine is considered operationally safe when used properly. Even if all of
the safety measures are complied with, there are still certain associated risks that
must be considered when working on the machine:
Improper operating on the machine
Serious injuries
●
Work on the machine may only be carried out by authorised, trained per-
sonnel who are familiar with how to operate the machine and are in strict
observance of all safety instructions.
●
If possible, only perform work when the machine is disconnected from all
energy sources and an unintentional restart is prevented.
●
The machine has to be switched off when carrying out any work on the
machine.
●
Disconnect machine from power supply before carrying out work at elec-
trical devices.
●
Do not deactivate or bypass protective devices.
Missing personal protective equipment
Serious injuries
●
Wear suitable personal protective equipment.
Pointy tools and sharp objects
Cuts and stab wounds
●
Use protective gloves.
Dust-emitting activities
Beech- and oak wood dust are classified as carcinogenic. The dusts of other
woods are under suspicion to be carcinogenic. Dust-emitting activities can cause
severe health damage.
●
Use dust mask during dust-emitting activities.
●
Use low-dust cleaning methods.
Содержание Hammer HNC3 825
Страница 69: ......
