FAQ • G6
2) How do I connect the G6 to the Wi-Fi of the camera? (Continued)
Sony RX0:
1
Turn on the camera, the gimbal and connect to the Feiyu ON app;
2
Press the menu button on the camera, using arrow buttons to navigate and
select ‘Network 1-Ctrl w/ smart phone’, confirm and enter the lower-level
menu;
3
Change the setting ‘Ctrl w/ smart phone’ into ‘on’, and navigate to
‘Connection info’, confirm and enter the lower-level menu;
4
Open the Wi-Fi and press the up-arrow button, the Wi-Fi information will
be displayed on the screen;
5
Open the app joystick interface and tap ‘Connect the Wi-Fi’, select RX0,
connect the camera Wi-Fi and key in the pin;
6
The camera working mode will be on the display once connected. Exit the
menu and return to the shooting mode and the gimbal is ready to control
the camera.
Find out more detailed instructions in the video:
https://www.youtube.com/watch?v=OhQIGUElwmM
3) How do I control photo-taking on the gimbal after connecting to the camera?
After the camera and the G6 have been successfully
connected, the shutter button on the gimbal can
control the camera to start or end shooting.
Refer to the video for detailed steps:
https://www.youtube.com/watch?v=OhQIGUElwmM
4) How do I set up the camera parameters on the G6?
When the camera has been connected (refer to Q9), press and hold the
setting button on the side of the handle until the camera setting page appears
on the screen of the gimbal. However, the joystick cannot rotate the gimbal in
setting mode.
Hero 5/6:
Turn the joystick to the left and right to select the camera setting,
and turn the joystick up and down to set up the camera parameters. After the
adjustment, move the cursor onto ‘OK’ and push the joystick to the right and
“Setting” will appear on the display. Press the setting button once and it will
return to the main interface of the display. Resolution, frame rate and width of
view are all adjustable.
RX0:
Turn the joystick to the left and right to select the camera setting,
press and hold the setting button to enter the lower-level menu. Set up
the parameters by turning the joystick to up and down again, and push the
joystick to the right to confirm the adjustment. Press the setting button once,
‘Setting’ will appear on the display and the system will return to the main
interface of the display. Parameters like white balance and ISO are adjustable
for RX0.
