Feiyue Yamata Family FM206, Руководство пользователя

Страница: 4 / 6

ADDITIONAL INFORMATION
People with pacemakers should consult their physician(s) before using this product. Operation of
electrical equipment in close proximity to heart pacemakers could cause interference or failure of the
pacemaker.
Always read and adhere to steaming instructions in this manual. Manufacturer is not responsible for
improper usage.
Do not use this unit without the microfiber pad as it might damage the surfaces.
Do not use this unit if it has been dropped, damaged, left outdoors or immersed in liquid.
This item is not intended for use by children.
The warnings and cautions discussed in this manual can not cover all possible conditions and situations.
Please exercise common sense and caution while using this item.
Do not force the appliance. Use this appliance only what it was intended for. Do not operate the steam
burst function if steam openings are blocked.Keep your work area unobstructed and well lit.
The microfiber pad can be machine washed in hot water and tumbled dry.
CUSTOMER SUPPORT
For questions on your Family Steam Mop FM206, please refer to the troubleshooting chart. Additional
inquiries should be directed to our Customer Support by emailing us at customerservice@feiyueusa.com
or by phone to our toll free line at 1 ‐ 888 ‐ 8FEIYUE.
PROBLEM SOLUTION
Unit is not turning ON Ensure unit is plugged in the socket and circuit
breaker is operational. Try using the unit from
another socket.
Unit is not producing steam Ensure the water reservoir is properly installed and
contains water.
Steam output decreases Possible Limescale build ‐ up. Clean steam system
and remove possible build ‐ up.
Excessive water residue on floor Ensure the Steam Mop is not in the same location
for too long. Microfiber pad contains excessive
water. Remove excess water in the pad or replace
soiled pad with dry pad.
LIMESCALE REMOVAL TIPS
If your Family Steam Mop begins to show sign of limescale build ‐ up and to produce steam slower than
usual or if it stops producing steam all together you may need to remove the build ‐ up in the steaming