Guilin Feiyu Technology Incorporated Company
Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]
- 1 -
G6 Plus Gimbal Firmware Upgrade Manual
for Windows
Attention
● Please get G6 Plus ready, along with USB cable, USB connector and computer before
operating.
● This software is just compatible with Windows operation system.
● Please do not press any other buttons except the ones indicated by the instructions
during upgrade.
● Please insert the battery before upgrading.
●
Connect micro USB cable to USB connector as indicated by the following before
operating.
Steps
1.
Download the USB driver from Feiyu official website
then install
it. Next, download the upgrade software and the firmware for G6 Plus.
2.
Connect USB connector to USB port of the computer. Then check port number in
Device Manager. If the COM number is more than COM10, please modify it to the
available number which is within COM10.
